Access Keys:
Skip to content (Access Key - 0)
 

Raspberry Pi too slow for OR?

Marc

On Jan 12, 2014 18:38

Hello,

I am using the B-Model of an RPi which I have as well overclocked to 900 MHz, but as soon as my OR model becomes quite large (>40 commands, >20 sensors, >20 sliders and some pictures), the Pi does not start the server anymore. On my powerful Windows7 machine everything works fine and extremely fast.
Am I doing something wrong with the RPi or is this just a limitation of the RPi's processor power?

What other "mini-PC" is doing the job without stopping the OR server in case I add some graphics?
I found a similar PC to the RPi (--> http://cubox-i.com/table/) but these ones are not available until late February 2014.
My goal is still using a mini-PC due to the power consumption.

Regards,

Marc

 
Labels:
Participants: Michal Rutka , Dieter Claeys , Marc , jules , Alexey
  1. Jan 12

    jules says:

    Hi Marc - I had the same problem with the Pi it was just too slow and could not ...

    Hi Marc - I had the same problem with the Pi it was just too slow and could not cope when I had lots of sensors, especially with the logs running. I went with an eBox 3310MX-AP which I tried to set up with Linux but had lots of problems - in the end I installed Windows XP and this is working fine. I also ended having to buy an external CD drive to install Windows XP and I put a SATA HD in as well. I also had trouble finding a Java version that ran on the Ebox as it is quite old architecture. For you and others just in case it is:
    java version "1.6.0_22"
    Java(TM) SE Runtime Environment (build 1.6.0_22-b04)
    Java HotSpot(TM) Client VM (build 17.1-b03, mixed mode, sharing)

    It takes about 1 minute to boot up into Openremote and I've installed VNC so I can control it remotely. It also has Auto power on so if there is a powercut it recovers fine.

    Like you previously I had OR running on a fast Windows7 machine and of course the Ebox is not as quick but it is fine for OR. The ebox is definitely less power hungry though.

    Jules

  2. Jan 13

    Alexey says:

    Use Odroid X2 or any cheaper model from HardKernel: http://hardkernel.com/main/p...

    Use Odroid X2 or any cheaper model from HardKernel: http://hardkernel.com/main/products/prdt_info.php?g_code=G135235611947

    $135

    • Low-cost development platform
    • 1.7GHz Quad core ARM Cortex-A9 MPCore
    • 2GB Memory
    • 6 x High speed USB2.0 Host port
    • 10/100Mbps Ethernet with RJ-45 LAN Jack
    • Android 4.x & Ubuntu BSP
    • Community-driven projects & supports
    CPU Module	1.7GHz Exynos4412 Prime Quad Core CPU module
    		Eposy molded on base board and not detachable
    
    LAN/USB Hub	LAN9514 4-port Hi-Speed USB 2.0 hub and 10/100 Ethernet controllers from SMSC
    
    Audio CODEC	MAX98090 is a full-featured and high performance audio CODEC from MAXIM
    
    DC/DC Converter	RP505K331B for 3.3Volt system power supply from RICOH
    
    Level shifter	FXMA2102L8X for I2C/UART/HDMI voltage translator from Fairchild semiconductor
    
    Camera (Option)	S5KECGMIPI 2-Lane camera interface on rear side from Samsung
    
    Board to Board connector
    		for CPU board and Application board from Uju Electronics
    
    HDMI		Standard Micro-HDMI, supports up to 1920 x 1080 resolution
    
    IO Port		50pin 2,54mm pitch box-header connector.
    		Interface signals for LCD-RGB, PWM, ADC, SPI, I2C, UART and GPIO
    
    DC Input	5V / 2A input, Plug specification is inner diameter 0.8mm and outer diameter 2.5mm
    
    1. Jan 17

      Dieter Claeys says:

      This post looks interesting to me. I was thinking of buying a BeagleBone Black f...

      This post looks interesting to me.
      I was thinking of buying a BeagleBone Black for running openremote for my home automation.
      (http://beagleboard.org/Products/BeagleBone%20Black)

      I would have:
      30 lightpoints on z-wave
      10 plugs on z-wave
      11 window/door sensors on z-wave
      8 danfoss thermostats on z-wave
      2 Samsung TV-s
      1 Plex media server

      So in the end it will be a big project...
      I am not so convinced now anymore this will run on my BeagleBone Black

      1. Jan 17

        Alexey says:

        Possibly system on Intel i3 or i5 will suit the best for you? Odroid X2 just ...

        Possibly system on Intel i3 or i5 will suit the best for you?

        Odroid X2 just came to me. Installed Ubuntu 13.11.
        Going to install Java nearest days.
        If anybody needs can make experiments.

        I havent plugged any sensors yet.
        Going to use it with 1-wire devices and OpenRemote.

        Alexey

      2. Jan 17

        Michal Rutka says:

        For so many Z-wave devices you will need the pro designer http://www.openremote....

        For so many Z-wave devices you will need the pro designer http://www.openremote.com/solutions/integrator-designer-new/
        It this case the eBox is an obvious choice. Beside the one offered in the pro bundle for 200 EUR extra you can find other suppliers too. For example http://www.minisys.eu/

        1. Jan 19

          Dieter Claeys says:

          Hi Michal, All my Z-wave devices would be linked to my Vera and then my Vera li...

          Hi Michal,

          All my Z-wave devices would be linked to my Vera and then my Vera linked to OpenRemote.
          So I haven't really figured out yet if I would buy the pro designer or not.

          I was planning on buying a NAS for my home entertainment system.
          Would running everything on the NAS be an option?

          1. Jan 19

            Michal Rutka says:

            Yes, NAS is an option. But there are different NAS'es. As far as I know most exp...

            Yes, NAS is an option. But there are different NAS'es. As far as I know most experience is done with Synology.

Adaptavist Theme Builder Powered by Atlassian Confluence