The new Siemens gateway is interesting also. It supports PoE and up to 4 simulta...
The new Siemens gateway is interesting also. It supports PoE and up to 4 simultan connections which is nice. Most of the current devices only support one connection.
Thanks again, wich of the Siemens gateways do you mean?
I have also been recomen...
Thanks again, wich of the Siemens gateways do you mean?
I have also been recomended the Weinzierl one. Do you know if this supports more than one connection?
http://www.weinzierl.de/en/products/770.html
Alright, so I finally have the new Siemens N 146/02 IP Router installed and conn...
Alright, so I finally have the new Siemens N 146/02 IP Router installed and connected to the KNX system.
The KNX system is also up and running, basically controlling lighting and heating, including scenarios etc.
I have also downloaded the full version of the OR KNX software.
The problem, or challenge, is programming the iphone. I can not find any nice tutorials on the website.
Is there any way I can import all the information about group adresses etc from the ETS library?
Comments (11)
May 24, 2010
Marcus Redeker says:
The eibmarkt one should work. You can find a list of supported devices here: htt...The eibmarkt one should work. You can find a list of supported devices here: http://www.openremote.org/display/orb/Supported+KNX+Gateways+and+Routers+in+OpenRemote+Boss+1.0
May 25, 2010
Vidar says:
Thanks, which of the listed devices would be recomended? I have also found anot...Thanks, which of the listed devices would be recomended?
I have also found another one that might be usable: www.weinzierl.de -> KNX IP BAOS 770
May 26, 2010
Marcus Redeker says:
The new Siemens gateway is interesting also. It supports PoE and up to 4 simulta...The new Siemens gateway is interesting also. It supports PoE and up to 4 simultan connections which is nice. Most of the current devices only support one connection.
May 26, 2010
Vidar says:
Thanks again, wich of the Siemens gateways do you mean? I have also been recomen...Thanks again, wich of the Siemens gateways do you mean?
I have also been recomended the Weinzierl one. Do you know if this supports more than one connection? http://www.weinzierl.de/en/products/770.html
May 26, 2010
Marcus Redeker says:
Info about the new Siemens devices: here I don't know if the Weinzierl allows m...Info about the new Siemens devices: here
I don't know if the Weinzierl allows more than one connection.
May 26, 2010
Vidar says:
.. and both N 148/22 IP Interface and N 146/02 IP Router will work?.. and both N 148/22 IP Interface and N 146/02 IP Router will work?
May 26, 2010
Marcus Redeker says:
Yes, and if you don't want to use the router to connect more than 1 KNX line, th...Yes, and if you don't want to use the router to connect more than 1 KNX line, the IP Interface is sufficient.
May 27, 2010
Vidar says:
Perfect. Looking for a store. Do you you if these are the new or old version? h...Perfect.
Looking for a store.
Do you you if these are the new or old version? http://www.eibmarkt.com/cgi-bin/eibmarkt.storefront/4bfe32f50056748a273d4debae3806bb/Product/View/NS0890109
or http://enertex.de/catalog/index.php?main_page=product_info&cPath=2_6&products_id=12&language=en
May 27, 2010
Marcus Redeker says:
The enertex one looks like the new one.The enertex one looks like the new one.
Aug 18, 2010
Vidar says:
Alright, so I finally have the new Siemens N 146/02 IP Router installed and conn...Alright, so I finally have the new Siemens N 146/02 IP Router installed and connected to the KNX system.
The KNX system is also up and running, basically controlling lighting and heating, including scenarios etc.
I have also downloaded the full version of the OR KNX software.
The problem, or challenge, is programming the iphone. I can not find any nice tutorials on the website.
Is there any way I can import all the information about group adresses etc from the ETS library?
Where would you recomend beginners to start?
Thanks,
Aug 19, 2010
Marcus Redeker says:
ETS import is not available yet. You can look at the documentation on the OpenR...ETS import is not available yet.
You can look at the documentation on the OpenRemote website.