Access Keys:
Skip to content (Access Key - 0)

Welcome to the OpenRemote Community

Discuss OpenRemote with us on the Mailinglist (or browse Forums archive).

You can find source code on Github.

Contact us for commercial support & service solutions.

Recent Contributions

Re: Work on v3 controller
Status update: Controller was renamed to Agent in v3 and I've cleaned it up some more. The main API is now AgentContext, start browsing the code from here if you are interested: https://github.com/openremote/openremote/blob/9cf842d5a4091fc6ceadacc55cb03553c8a2deb8/agent/src/main/java/org/openrem
Quad or Octa core processor based controller
Hi I'm curious, has anyone tried running a controller on a Quad core or Octa core single board computer yet? Cheers, Stuart
Got my first app synced- any button press causes iOS app to crash.
I built a simple Russound remote and managed to get it synced up and displaying on my iPhone by following this tutorial: http://www.openremote.org/display/docs/OpenRemote+2.0+How+To+-+Russound+Sound+System Any time I press a button, the app crashes and the command is not sent to my Russound.
Re: "Saving your design failed due a prior safety lock of your account" How to resolve?
Yes, this works now thank you for the update! On Tuesday, November 29, 2016 at 1:57:48 AM UTC-8, Michal Rutka wrote: > > Hi, > > > in the meantime the designer was reset. Please check if you can save your > work now? > > > Kind regards, > > Michal > > On Wednesday, November 23, 2016 at 7:21:53 PM
Insteon Hub
If I want to control insteon devices on my network, do I have to do individual setups on each device or can I integrate into my insteon hub?
Re: DIN rail cabinet mounted Single Board computer solution for OpenRemote
There hasn't been any RXTX development for years. Can jvelbusd be configured with https://github.com/NeuronRobotics/nrjavaserial as a drop-in replacement? This is much easier to install as it automatically picks the right native libraries, so you shouldn't have to install anything extra. The
Re: DIN rail cabinet mounted Single Board computer solution for OpenRemote
I think I've just realised a small detail. I think... RXTXcomm.jar is actually a SymLink to the actual RXTX jar file. In one case this is RXTXcomm-2.2pre2.jar Does this help?
Re: DIN rail cabinet mounted Single Board computer solution for OpenRemote
Hi I haven't touched a RaspberryPi at all, but we've got JVelbusD working on a couple of variations of Linux machines. The secret seems to be getting RXTXcom.jar into the correct folders. The advice I've been given is :- [quote] 1) .Install JRE: - sudo apt-get install openjdk-7-jre-headless
Re: DIN rail cabinet mounted Single Board computer solution for OpenRemote
Did you guys succeed in getting the jvelbusd to run on a raspberry pi --> jessie. On Wednesday, 25 May 2016 21:15:03 UTC+2, Stuart Hanlon wrote: > > For those that are looking for a neat and discreet way to host an > OpenRemote controller in your system, you'll be glad to know that we are >
Re: "Saving your design failed due a prior safety lock of your account" How to resolve?
Hi, in the meantime the designer was reset. Please check if you can save your work now? Kind regards, Michal On Wednesday, November 23, 2016 at 7:21:53 PM UTC+1, Sean H wrote: > > I can't seem to get anything to save or export as .zip. I get the message > "Saving your design failed due a
© 2016 OpenRemote Inc. All Rights Reserved.
Adaptavist Theme Builder (3.3.6-conf210) Powered by Atlassian Confluence 2.10.3, the Enterprise Wiki.